APOX MOLD MASTER is a superior quality admixture specially developed for application in pre – cast concrete, high performance concrete and for manufacturing of cement tiles , paver blocks etc…..

1. To increase workability in concrete used in casting pre – cast units, cement tiles, paver blocks and  for uses in white cement mixes.

2 . To increase compressive strength.

3. To allow for reduction in water.

4. Due to increased strength development characteristics the elimination or reduction of steam curing in pre _ cast work.

Apox mold master should be added to. Concrete / mortar during the mixing cycle at the same time as water is added avoid  adding to dry cement.

• It is a clear liquid hence does not change color in concrete.
• It is strongly recommended for tile industries and pre – cast units.
• Easy to does.
• Lowers permeability.
• Increases durability.
• Reduces shrinkage cracks.

Field trials should be conducted to determine the exact dosage. However a dosage range varying between 150 ml to 500ml per 50kg bag of cement can be recommended.

The above information and details herein and based on the test conducted and experience on applications and usage. The user is advised to carry out the test and take trials to satisfy on the suitability of the product and meeting his requirements considering the prevailing conditions prior to apply/using it on large area. As the conditions under which the product are used for transported are beyond our control. We would not hold ourselves responsible on its consequential non performance.